618 Series EW

Benefits

• PetroClear models 61805EW, 61810EW and 61830EW are particulate removing and water sensing replacement element type filters designed for aftermarket, cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial applications.
• The 61805EW, 61810EW and 61830EW are designed to remove particulate and to sense both free and emulsified water from NEAT GASOLINE, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene and fuel oils.
• PetroClear models 61805EW, 61810EW and 61830EW are particulate and water sensing replacement element type filters. These filters are designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in NEAT GASOLINE. This filter will not sense or react to water in Ethanol blended gasoline.
• PetroClear model 61805EW filter offers efficient 5 micron nominal particulate removal (nominal = 75% efficiency) and senses both free and emulsified water.
• PetroClear model 61810EW filter offers efficient 10 micron nominal particulate removal (nominal = 75% efficiency) and senses both free and emulsified water.
• PetroClear model 61830EW filter offers efficient 30 micron nominal particulate removal (nominal = 75% efficiency) and senses both free and emulsified water .
• PetroClear models 61805EW, 61810EW and 61830EW will not detect phase separation should it occur in Ethanol blended fuels.

Specifications

• The PetroClear model 61805EW utilizes a 5 micron nominal cellulose super absorbent media to remove particulate and sense water in NEAT GASOLINE, Diesel fuels, Biodiesel and ULSD (Ultra Low Sulfur Diesel), kerosene, lube oils, fuel oils, and synthetic fluids. Removes a minimum of 75% of particulate 5 micron size (and approximately 100% of larger sized particulate).
• The PetroClear model 61810EW utilizes a 10 micron nominal cellulose super absorbent media to remove particulate and sense water in NEAT GASOLINE, Diesel fuels, Biodiesel and ULSD (Ultra Low Sulfur Diesel), kerosene, lube oils, fuel oils, and synthetic fluids. Removes a minimum of 75% of particulate 10 micron size (and approximately 100% of larger sized particulate).
• The PetroClear model 61830EW utilizes a 30 micron nominal cellulose super absorbent media to remove particulate and sense water in NEAT GASOLINE, Diesel fuels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene, lube oils, fuel oils, and synthetic fluids. Removes a minimum of 75% of particulate 30 micron size (and approximately 100% of larger sized particulate).
• The maximum flow rate for PetroClear models 61805EW, 61810EW and 61830EW is 60 gpm (225 lpm). Maximum operating pressure is 50 psid (3.4 bar). Maximum differential pressure is 25 psid (1.7 bar).
• PetroClear models 61805EW, 61810EW and 61830EW replacement elements fit the Cim-Tek, Commercial, Cuno, Facet, Hilco, Hycon, Hytrex, Kaydon, Nugent and Peco housings and other brands with a 6" x 18" element.
• Once PetroClear models 61805EW, 61810EW and 61830EW have absorbed 28.9 ounces (855 mil) of water from NEAT GASOLINE or diesel fuels, flow will be noticeably slow.
• Each filter is packaged with a separate gasket kit that will fit most standard brands of filter housings.

Specifications

*Water Sensing in NEAT GASOLINE and Particulate Removing

Dimensions/Flow Rate

Note

NOTE: If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc.

For disposal information please contact your nearest EPA office.